ProStar™ Double-Sided Plate Bevelers - PRSPBABM1218

High-Efficiency, Self-Feeding Beveler

Linde's ProStar™ PRSPBABM1218 is a portable beveling machine capable of producing weld-ready bevels on flat plates of any shearable material up to 100,000 psi tensile strength. The ABM1218 FR uses a shearing process that is silent and fast, with a powerful 3 horsepower electric motor that drives the machine at speeds up to 8.5 feet per minute. The machine can produce a 1/2 inch (12 mm) wide bevel in a single pass and can produce a maximum 3/4 inch (18 mm) wide bevel on plates or round tubes from 1/4 inch (6 mm) to 1-9/16 inches (40 mm) thick in multiple passes.


  • Produce weld-ready bevels without thermal distortion or heat affected zone (HAZ)
  • Self-feeding machine produces consistent bevel geometry from end-to-end
  • Quickly invert machine to produce X and K bevels – without flipping the plate; reducing material handing cost



Available Options

  • Cutting wheels available for mild steel, stainless steel and aluminum
3d pipe cutting machines by Praxair cut with plasma or oxyfuel and enable extreme accuracy with an optional bevel.

Standard Configuration 

Part No.VoltagePowerSpindle Speed

Bevel Angle Range

Maximum Bevel Width Cutting SpeedMinimum Pipe IDShipping Weight
PRSPBABM1218480 V, 3 Phase, 50 - 60 Hz2,200 Watts9 rpm22.5°, 25°, 30°, 37.5°, 45°3/4 in. (18 mm)8.5 ft. / min. (2.6 m / min.)4 in. (100 mm)144 lbs. (65 kg)

Specifications subject to change without notice.