Categories
Welding Wire & Electrodes
Welding Wire Solid Welding Wire Flux-Cored Welding Wire Metal-Cored Welding Wire Submerged Arc Welding Wire
Welding & Cutting Equipment
Oxy Actylene Welding & Cutting Lighters & Flints Oxy Acetylene Welding & Cutting Torches Oxy Acetylene Welding & Cutting Outfits Quick Connectors Oxy Acetylene Welding & Cutting Torch Attachments Flashback Arrestors Oxy Acetylene Welding & Cutting Torch Handles Burning Bars & Lances Oxy Acetylene Cutting Machine Accessories Oxy Acetylene Cutting Machines
Abrasives
Safety & PPE
Protective Clothing Welding & Fire Resistant Clothing High Visibility Vests & Jackets Aluminized Clothing
Welding Helmets & Lenses Welding Lenses, Filters & Covers Welding Helmets Welding Helmet Replacement Headgear Welding Helmet Accessories
Welding & Cutting Consumables
MIG Welding Consumables MIG Contact Tips MIG Nozzles MIG Diffusers MIG Liners MIG Insulators MIG Drive Rolls Mig Conductor Tubes MIG Consumable Kits
TIG Welding Consumables Tungsten Electrodes TIG Cups TIG Collet Bodies TIG Collets TIG Torch Back Caps TIG Insulators & Gaskets TIG Gas Lenses TIG Consumables Kits TIG Nozzles
Plasma Cutting Consumables Manual Cutting Consumables Manual Plasma Torch Electrodes Manual Plasma Torch Nozzles Manual Plasma Torch Shield Caps Manual Plasma Torch Tips Manual Plasma Torch Retaining Caps Manual Plasma Torch Swirl Rings Manual Plasma Torch Start Cartridges Manual Plasma Torch Consumables Kits Manual Plasma Torch Deflectors Manual Plasma Torch O-Rings Manual Plasma Torch Diffusers Manual Plasma Torch Collets
Lancer Series PRS4 & PRS8
Linde's ProStar™ Lancer™ Series CNC plate cutting systems featuring Hypertherm® or Thermal Dynamics® plasma cutting systems provide an affordable cutting solution for the processing needs of light fabricators, job shops, HVAC, artists and sign companies. Lancer Series cutting systems are easily deployed and require minimal setup.
Standard Features
- Cuts steel, stainless steel and aluminum
- 100% welded machine framework
- Aluminum beams
- Precision rack and pinion drives
- CNC grade carriers and cables
- FlashCut™ CNC controller
- Available for Hypertherm or Thermal Dynamics plasma units
- Voltage-sensing torch height control
- Embedded CAD/CAM software with nesting capability
- Laser pointer for plate alignment
- Ohmic initial height sensing
- Static level water table
- Easy to deploy CNC machine
- Minimal assembly required
Linde's ProStar Lancer Series CNC cutting systems can be configured with Hypertherm or Thermal Dynamics plasma systems and other manufacturers.
Standard Configuration
| Part No. | Traversing Speed | Cutting Speed | Resolution | Plasma | Oxy-Fuel | Width | Lenght | Footprint (W/L) | Power Requirements |
|---|---|---|---|---|---|---|---|---|---|
| PRS4 | Up to 600 ipm (micro stepper motors) | Up to 500 ipm | ± .005 mechanical (over 6 ft. area of table) | Up to 7/8 in. | N/A | 54 in. | 54 in. | 74 in. X 96 in. | Machine: 20 A/100 V |
PRS8 | Up to 600 ipm (micro stepper motors) | Up to 500 ipm | ± .005 mechanical (over 6 ft. area of table) | Up to 7/8 in. | N/A | 54 in. | 102 in. | 74 in. X 148 in. | Machine: 20 A/100 V |
| PRS48 | Up to 700 ipm (servo motors) | Up to 500 ipm | ± .005 mechanical (over 6 ft. area of table) | 1-1/4 in. | 3 in. | 54 in. | 102 in. | 71 in. X 162 in. | Controller: 20A / 110V, Drives: 20A / 240V (1/3-ph) |
| PRS51 | Up to 700 ipm (servo motors) | Up to 500 ipm | ± .005 mechanical (over 6 ft. area of table) | 1-1/4 in. | 3 in. | 66 in. | 126 in. | 83 in. X 186 in. | Controller: 20A / 110V, Drives: 20A / 240V (1/3-ph) |
| PRS62 | Up to 700 ipm (servo motors) | Up to 500 ipm | ± .005 mechanical (over 6 ft. area of table) | 1-1/4 in. | 3 in. | 78 in. | 150 in. | 96 in. X 210 in. | Controller: 20A / 110V, Drives: 20A / 240V (1/3-ph) |
Specification subject to change without notice.