volt-pre-order

Miller Electric Invision 450 MPa 230/460 V MIG Welder | 907485

Linde Part #: MIL907485 Manufacturer's Part #:907485  /

 
How do I buy this?

Miller Electric Invision 450 MPa 230/460 V MIG Welder

MIG and synergic Pulsed MIG system with optimized weld programs for both steel and aluminum.

Features

  • Automatically set the optimal parameters for a wide variety of wires making it easy to set up and use.
  • As wire speed increases/decreases, pulse parameters also increase/decrease to match the right amount of power needed, eliminating the need to make additional adjustments.
  • Provides TIG appearance with MIG simplicity and productivity. Achieve "stacked dimes" without gun manipulation. Profile Pulse frequency can be changed to increase or decrease the spacing between the ripple pattern to achieve the desired weld appearance.
  • Protects internal components, greatly improving reliability.
  • Cooling system operates only when needed, reducing noise, energy use and amount of contaminants pulled through machine.
  • Fine tunes puddle fluidity in Pulsed MIG (GMAW-P) welding.
  • Dedicated XR-Pistol Plus and XR-Aluma-Pro Plus guns work with the 74 MPA Plus feeder to coordinate wire feed speed of the gun and the feeder. This provides optimized aluminum feeding and welding performance.

  •  

    Miller Electric Invision 450 MPa 230/460 V MIG Welder

    MIG and synergic Pulsed MIG system with optimized weld programs for both steel and aluminum.

    Features

  • Automatically set the optimal parameters for a wide variety of wires making it easy to set up and use.
  • As wire speed increases/decreases, pulse parameters also increase/decrease to match the right amount of power needed, eliminating the need to make additional adjustments.
  • Provides TIG appearance with MIG simplicity and productivity. Achieve "stacked dimes" without gun manipulation. Profile Pulse frequency can be changed to increase or decrease the spacing between the ripple pattern to achieve the desired weld appearance.
  • Protects internal components, greatly improving reliability.
  • Cooling system operates only when needed, reducing noise, energy use and amount of contaminants pulled through machine.
  • Fine tunes puddle fluidity in Pulsed MIG (GMAW-P) welding.
  • Dedicated XR-Pistol Plus and XR-Aluma-Pro Plus guns work with the 74 MPA Plus feeder to coordinate wire feed speed of the gun and the feeder. This provides optimized aluminum feeding and welding performance.

  • Brand Miller Electric
    MIG Welding Maximum Output Current 600 A
    For Wire Type Flux-Cored
    Frequency 60 Hz
    Overall Depth 27.125 in
    Overall Height 17.25 in
    Overall Width 14.5 in
    Phase Three-Phase
    Voltage 230 V, 460 V
    MFG 907485
    MIG Welding Minimum Output Current 15 A
    Subcategory Welding Equipment

    Specifications