volt-pre-order

Washington Alloy RG-60 Gas Welding Rod - RG60 - 1/8in | TR RG 60 06

Linde Part #: WAHTRRG60/06 Manufacturer's Part #:TR RG 60 06  /

 
How do I buy this?

Washington Alloy RG-60 Gas Welding Rod - RG60 - 1/8in

RG60 is used to produce high tensile strength quality welds on low carbon and low alloy steels such as sheets, plates, pipes of grades A and B analysis and structural shapes. It is recommended for critical welds that must respond to the same annealing and heat treatment as regular grades of cast steel. The high silicon and manganese composition removes impurities from the molten metal thereby eliminating the need for flux. Clean joint and bevel heavy sections keeping torch tip at low angle to base metal. Preheat normally not necessary as your torch will preheat during your process.

 

Washington Alloy RG-60 Gas Welding Rod - RG60 - 1/8in

RG60 is used to produce high tensile strength quality welds on low carbon and low alloy steels such as sheets, plates, pipes of grades A and B analysis and structural shapes. It is recommended for critical welds that must respond to the same annealing and heat treatment as regular grades of cast steel. The high silicon and manganese composition removes impurities from the molten metal thereby eliminating the need for flux. Clean joint and bevel heavy sections keeping torch tip at low angle to base metal. Preheat normally not necessary as your torch will preheat during your process.

Brand Washington Alloy
Overall Length 36 in
Series RG-60
Tensile Strength 60 to 75 ksi
MFG TR RG 60 06

Specifications